BREK SamirMeddour BelkacemGroun Brahim2024-02-122024-02-122020-12-061958-5799http://dspace.univ-khenchela.dz:4000/handle/123456789/519Composite materials are very widely used in the manufacturing of structures because of their specific mechanical properties. However, they are characterized by heterogeneity and anisotropy and they present great challenges in designing and also in predicting their behavior by using the numerical simulation. The unidirectional composite material has a more relevant property which is the transverse elasticity modulus E2. The determination of E2 is still interesting researchers because of the diversity of results obtained by several models and approaches. This study aims to predict the transverse elasticity modulus E2 of a unidirectional Glass/Epoxy composite material, the effect of the arrangement fibers on the transverse elasticity modulus and predict the values of the reinforcement factorξ used in the Halpin-Tsai model. To do so first we adopted the micromechanical approach, which is accurate but requires much computing, and we used a calculation code based on FEM method and considered two parameters to vary, which are the volume fraction of fibers and the distribution of fibers. The obtained results of numerical modeling were tightly compared to those obtained by the available analytical models and the adopted approach can be used to predict the transverse elasticity modulus E2 and the reinforcement factor ξ.Composite materials are very widely used in the manufacturing of structures because of their specific mechanical properties. However, they are characterized by heterogeneity and anisotropy and they present great challenges in designing and also in predicting their behavior by using the numerical simulation. The unidirectional composite material has a more relevant property which is the transverse elasticity modulus E2. The determination of E2 is still interesting researchers because of the diversity of results obtained by several models and approaches. This study aims to predict the transverse elasticity modulus E2 of a unidirectional Glass/Epoxy composite material, the effect of the arrangement fibers on the transverse elasticity modulus and predict the values of the reinforcement factorξ used in the Halpin-Tsai model. To do so first we adopted the micromechanical approach, which is accurate but requires much computing, and we used a calculation code based on FEM method and considered two parameters to vary, which are the volume fraction of fibers and the distribution of fibers. The obtained results of numerical modeling were tightly compared to those obtained by the available analytical models and the adopted approach can be used to predict the transverse elasticity modulus E2 and the reinforcement factor ξ.enArticle